LAN Interface

• Four ports 10/100BaseT Ethernet switch HUB, IEEE 802.3u
• Connector: RJ-45

WAN ADSL Line Interface

• Compliance: ITU G.992.1, G.992.2, G.992.3, G992.4, G.992.5 (X7722+ only) and ANSI T1.413 Issue 2
• Line Impedance: 100 W
• Connection Loops: One Pair (2-wire)
• Connector: RJ-11

Indicators

• PWR -- Green LED, indicates power and operation
• LAN -- Green LED, indicates local interface link status
• ACT -- Green LED, indicates data Transmitting / Receiving
• WAN -- Green LED, indicates ADSL data link
• ALM -- Red LED, indicates data error or operation fault

OAM&P

• Telnet or Web management via Ethernet
• Remote: Telnet or Web Management

Environment

• Operation Temperature: 0 ° C ~ 45 ° C
• Operation Humidity: 5% ~ 95%
• Storage Temperature: -20 ~ 85 ° C
• Storage Humidity: 5% ~ 95%

Power

• AC Adapter: Input 110/220VAC, 50/60Hz; Output 15VAC 1A
• Power Consumption: Less than 9 Watts
• Certificate
• CE, CB

SOFTWARE

ATM

• ATM Cells over ADSL, AAL5
• Bridge mode: Supports 8 PVCs
• Router mode: Supports 5 PVCs
• Supports UBR, CBR, VBR-nrt and VBR-rt
• ATM Forum UNI 3.0, UNI 3.1, UNI 4.0
• ILMI 4.0
• PPP over ATM PVC (RFC 2364)

Bridging

• Transparent Bridging (IEEE 802.1d)
• RFC2684 (RFC1483) Bridged
• Spanning Tree Protocol (IEEE 802.1d)
• IP and PPPoE packet filtering
• IP Multicast IGMP Proxy

Routing

• IP routing, RIP1, RIP2, OSPF and static routing
• PPPoE, IP, and PPP over ATM
• PAP and CHAP
• RFC2684 (RFC1483) Routed
• NAT/PAT with extensive ALG support
• DNS relay
• Multihoming (IP Aliasing)

Configuration and Network Management features

• DHCP client and server for IP management
• Telnet for local or remote management
• TFTP, HTTP for firmware upgrade and configuration
• Web-based configuration and management
• SNMP v1, v2, and v3 Agent
• SNMP MIB II
• DSL MIB
• ATM MIB

Ordering Information:

V00-11120-01: VoicePath ADSL6500-330 Broadband ADSL Router