EtherPath
EtherPath ESS3228-XTD

Temperature Hardened Layer 3 Managed Ethernet Switch

ETHERPATH ESS3228-XTD is a Layer 3 Ethernet Routing switch developed with the performance and features required to address harsh outdoor temperature environments from -40oC to +70oC. The F100-XTD is available with AC power or -48VDC dual power inputs.

ETHERPATH ESS3228-XTD is a full featured L3+ routing switch with 24 Fast Ethernet ports and 4 Gigabit ports. There are two gigabit SFP ports and two slots for user installable plug-in cards. 1000Base T, 100Base FX and SFP plug-in cards are available.

Features
  • Twenty four (24) auto-MDIX 10/100 ports
  • Gigabit interfaces options are: choice of gigabit interface cards (up to 2),plus 2 built-in SFP ports.
  • 12.8Gbps switching fabric
Layer 2 Features
  • Learning, forwarding and aging
  • STP and Rapid STP
  • MAC Filtering
  • MAC Port security
  • Port based and Protocol based VLAN, VLAN tagging, Dynamic VLAN, GVRP
  • Q-in-Q (double tagging)
  • Priority Queuing
  • Flow Control
  • Link Aggregation (8 Groups/8 Ports Each)
  • Port mirroring
  • Broadcast storm recovery
  • Head of Line Blocking Prevention
  • GMRP, IGMP Snooping
  • 802.1x Access Control (PEAP, CHAP)
Layer 3 Features
  • IPv4 Routing
  • ARP, ARP proxy*, and RARP*
  • Multi-port Subnet-VLAN Routing
  • Static IP Routes
  • Multi-subnet Broadcast
  • CIDR, VLSM, Route Summarization
  • RIP1, RIP2
  • OSPFv2
  • BGP (Optional Software Feature)
  • Route re-distribution between RIP, OSPF, local, and static
  • IP Multicast (IGMPv2, DVMRP, PIM-DM, and PIM-SM) (Optional Software Feature)
  • VRRP
  • Router Discovery
  • Secondary IP Address Capability
  • Class of Services
Layer 3+ and Additional Features
  • BOOTP/DHCP Relay
  • Bandwidth Allocation
  • Packet Filtering and Access Control List (ACL)
  • Network Address Translation (NAT)
  • Protection against Denial of Service (DOS)
OAMP Features
  • BOOTP/DHCP
  • Software and Configuration Updates using TFTP, XMODEM
  • POST and Diagnostics
  • Syslog
  • User Interface (CLI, Telnet, WBI)
  • SSH and SSL*
  • RADIUS Based Authentication*
  • SNMPv1/v2c/v3, RMON